Gembird CAM77IP Bedienungsanleitung

IP camera CAM77IP LAN-controlled IP camera

IP camera home router/gateway connection shown as below. • Connect the power supply to the Power connector, and then plug the supply into an avail

IP camera CAM_EZ SEARCH Browse the IP camera CD. Execute the d:\Utility\CAM_EZ search program. The CAM_EZ search can be used to manually configure

IP camera • Access the CAM77IP setup page via Internet Explorer by double click on "your CAM77IP list" CAM_EZ Search diagram

IP camera System Login System login ensure authentication is done to any attempted access to the system. Our system provided 2 level of administra

IP camera 2. The System Login pages should shown as below: 3. Enter the Account ID and Password; Default Account ID = "admin", P

IP camera Real-time Surveillance While running IPCAM for the first time, "Internet Explore Security Settings" have to be change to view

IP camera Real-time Snapshot This function enables hotkey to trigger saving captured picture to computer. Step 1. Enter the LiveView menu. Step 2

IP camera Advanced Function With Liveview Place the mouse cursors over the Liveview image, then right click, list with 4 options will shown as bel

IP camera Image Adjustment Step 1. Place the mouse cursors over the Liveview image. Step 2. Rght click and choose image on the menu, change the ima

IP camera Zoom in Display Step 1. Place the mouse cursor over the Liveview image. Step 2. Right click and choose Zoom on the menu Step 3. Use curs

IP camera Disclaimer • We spared no efforts to make sure that the information in this manual is correct and complete. However no liability is acce

IP camera Advanced Application This chapter will cover the Advanced Application for CAM77IP, includes: * Image Setup * Capture View * Network Setu

IP camera Capture View Capture View Includes: * LiveView - Manual captured static Image. * MD - active Motion Detection Caption. Procedure:

IP camera Event Trigger Event Trigger type and detail settings, includes: * Event - provide 2 MD set * Trigger - Activate and capture images

IP camera Trigger Event Trigger event action, include: * Save in PC: Store captured image in PC. * Save in Flash Card: Store captured image in Flas

IP camera Network Setup Network Setup is to change the IPCAM network connection method, default mode is Static, IP address will be obtain staticall

IP camera If Static method is choose, the following have to be filled: IP Address: IP Address of IPCAM. Subnet Mask: default as 255.255.255.0. Gate

IP camera HTTP Server assign the port connected to CAM77IP contained Web Server (or HTTP Server), default as port 80. DNS Server Holds appointed

IP camera Server Setup This page includes Server Setup and configuration, includes: * Mail Server: Mail Server Setting * FTP Server: FTP Server Se

IP camera Step 3. Receipt to: Recipient's E-mail address Step 4. Account ID: Account ID for E-mail account Step 5. Password: Password for E-ma

IP camera Step 1. Register a set of account, password and HTTP user website from DDNS service (e.g. http://www.dyndns.org) Step 2. Host Name: Fill

IP camera Introduction Thank you for buying the Gembird® LAN-controlled IP camera with MJPEG recording, motion detection, flash-card and night-

IP camera Administration Setup Administration Setup allows changes on IPCAM name, General User and Administrator user/password. Administrator coul

IP camera Step 3. New Password: Enter the new Password. Step 4. Re-type: Re-Enter the new Password to confirm. Step 5. Click Submit to confirm and

IP camera Step 5. Click Submit to confirm and save settings. Step 6. The file will start to upload; on a 100Mbps Network it should takes around 7~1

IP camera CAM77IP via PPPoE dial-up with DDNS operation sample (Using a HUB) Using Hub medium between PC side and CAM77IP with configured PPPoE t

IP camera Step 3. Fill in the account you want to create (e.g. mycam) Enter E-mail Address, Password, then click Create Account to finish applicati

IP camera Step 7. The screen will automatically divert to Services menu, click on the Domain Name pull down menu for desire domain name (we choose

IP camera PC connection with CAM77IP (using CAM_EZ Search Tool) Step 1. CAM77IP, HUB and PC connection diagram: Step 2. Execute CAM_EZ Searc

IP camera Setting for CAM77IP using PPPoE dial-up method with DDNS setting Step 1. Click on Network and open the Network menu, in PPPoE menu fill

IP camera F.A.Q. Q: Why isn't the time show correctly on my image? A: Please make sure the gateway have access to the Internet, the SNTP is c

IP camera Q: How could I find the CAM77IP, if I forget the password and IP address? A: Press and hold SW2 Reset button for over 5 seconds to restor

IP camera Features • Remote controlled via Ethernet network (RJ45 connector) • Accessible via HTTP, FTP protocols, sends records by E-mail (SMT

IP camera Configuring your Camera to for remote Access via the Internet The CAM77IP can be accessed easily from a remote location with an Interne

IP camera subnet of the camera. Then browse to the camera's IP address (default 192.168.1.100) to bring up the home page of the camera. 1. Cli

IP camera 4. From the menu, choose Show Advanced settings then choose Port Forwarding / Virtual Server 5. Enter the IP addresses and ports given in

IP camera Config should only be made locally. Note 1: You may not be able to view a camera on a computer that's on the same LAN using the came

IP camera Package contents • IP camera with base • Power adaptor with 1.4m cable • Driver and software CD • 2m LAN cable System requirements

IP camera Hardware Descriptions and Connection Product Bottom Figure 1. CAM77IP Network Camera Bottom View SW1: Hardware Rest SW2: Pres

IP camera Bottom Front Figure 2. CAM77IP Network Camera Front View Lens cover Status LED Lens Infrared LED

IP camera Connectors Figure 3. CAM77IP Network Camera rear view SD Storage Card Figure 4. SD Storage Card

IP camera Installation and configurations Hardware Installation Figure 5. Installation diagram • Plug the Ethernet cable into the RJ-45